Der er 14 varer.
RC Project Kit Shock Pins with thread in Ergal 7075-T6 (4)
The Shock Pins "Valente Edition" are Made in Italy, with latest generation Swiss type lathe center. Our products are made with Ergal 7075-T6 billet and then Hard Coating with a thickness of 50µ. The "Valente Edition" pins have the 5.5mm External Hexagon and a 2.5mm Internal Hex to be screwed with the Screwdriver. The Black pins have the right-hand thread and the Gold pins have the left-hand thread. The Diameter of the Thread has been increased by 0.05mm to be able to adapt even to non-new arms. The weight of the Kit is 3.5g.
RC Project Kit Standoff Shockabsorbers +5mm in Ergal 7075-T6 (2)
The New Standoff are produced from a bar in Ergal 7075 T6 Certificate, unlike all the Standoff currently on the market we have studied a particular Geometry that allows to increase the Contact Surface between Bushing and Standoff; this allows a life of the Standoff and the relative Bushing of 600% more than the whole Competition. To finish a Hard Coating and Teflon Treatment allows to reduce the friction between Bushing and Standoff, all this has allowed us to Guarantee 30/35 Liters without replacing Standoff and Bushing . To decrease the suspended masses and improve driveability, you will also find the corresponding Titanium Grade 5 6Al4V Allen Screw with Rolled Thread. Replacing Articles SW330138B.
RC Project Kit Standoff Shockabsorbers in Ergal 7075-T6 (2)
The New Standoff are produced from a bar in Ergal 7075 T6 Certificate, unlike all the Standoff currently on the market we have studied a particular Geometry that allows to increase the Contact Surface between Bushing and Standoff; this allows a life of the Standoff and the relative Bushing of 600% more than the whole Competition. To finish a Hard Coating and Teflon Treatment allows to reduce the friction between Bushing and Standoff, all this has allowed us to Guarantee 30/35 Liters without replacing Standoff and Bushing .To decrease the suspended masses and improve driveability, you will also find the corresponding Titanium Grade 5 6Al4V Allen Screw with Rolled Thread. Replacing Articles SW330138B.
RC Project Kit Upper Link Balls "REVERSE" in Ergal 7075-T6 (2)
The Balls are Made in Italy, with latest generation Swiss type lathe center. Our products are made with Ergal 7075-T6 billet and then Hard Coating with a thickness of 50µ. In addition, a Teflon Coating was carried out to reduce the coefficient of friction with the Uniball. The weight of the Kit is 2.0g.
RC Project Kit Steering Balls for Ackerman Alu T7075-T6 (4)
The Balls are Made in Italy, with latest generation Swiss type lathe center. Our products are made with Ergal 7075-T6 billet and then Hard Coating with a thickness of 50µ. In addition, a Teflon Coating was carried out to reduce the coefficient of friction with the Uniball. The weight of the Kit is 2.0g.