Option Parts

Option Parts

Der er 254 varer.

Sorter efter:
Relevans Navn, A til Z Navn, Z til A Pris, lav til høj Pris, høj til lav
Viser 1-45 af 254 element(er)

Aktive filtre

RC Project Kit Shock Pins with thread in Ergal 7075-T6 (4)

RC Project Kit Shock Pins with thread in Ergal 7075-T6 (4)

The Shock Pins "Valente Edition" are Made in Italy, with latest generation Swiss type lathe center. Our products are made with Ergal 7075-T6 billet and then Hard Coating with a thickness of 50µ. The "Valente Edition" pins have the 5.5mm External Hexagon and a 2.5mm Internal Hex to be screwed with the Screwdriver. The Black pins have the right-hand thread and the Gold pins have the left-hand thread. The Diameter of the Thread has been increased by 0.05mm to be able to adapt even to non-new arms. The weight of the Kit is 3.5g.

Pris 133,00 kr.
RC Project Kit Standoff Shockabsorbers +5mm in Ergal 7075-T6 (2)

RC Project Kit Standoff Shockabsorbers +5mm in Ergal 7075-T6 (2)

The New Standoff are produced from a bar in Ergal 7075 T6 Certificate, unlike all the Standoff currently on the market we have studied a particular Geometry that allows to increase the Contact Surface between Bushing and Standoff; this allows a life of the Standoff and the relative Bushing of 600% more than the whole Competition. To finish a Hard Coating and Teflon Treatment allows to reduce the friction between Bushing and Standoff, all this has allowed us to Guarantee 30/35 Liters without replacing Standoff and Bushing . To decrease the suspended masses and improve driveability, you will also find the corresponding Titanium Grade 5 6Al4V Allen Screw with Rolled Thread. Replacing Articles SW330138B.

Pris 164,00 kr.
RC Project Kit Upper Link Balls "REVERSE" in Ergal 7075-T6 (2)

RC Project Kit Upper Link Balls "REVERSE" in Ergal 7075-T6 (2)

The Balls are Made in Italy, with latest generation Swiss type lathe center. Our products are made with Ergal 7075-T6 billet and then Hard Coating with a thickness of 50µ. In addition, a Teflon Coating was carried out to reduce the coefficient of friction with the Uniball. The weight of the Kit is 2.0g.

Pris 72,00 kr.
RC Project Kit Steering Balls for Ackerman Alu T7075-T6 (4)

RC Project Kit Steering Balls for Ackerman Alu T7075-T6 (4)

The Balls are Made in Italy, with latest generation Swiss type lathe center. Our products are made with Ergal 7075-T6 billet and then Hard Coating with a thickness of 50µ. In addition, a Teflon Coating was carried out to reduce the coefficient of friction with the Uniball. The weight of the Kit is 2.0g.

Pris 117,00 kr.
SWORKz S35 Shock Conversion Kit V2(4)

SWORKz S35 Shock Conversion Kit V2(4)

Set consisting of 4 shock absorbers specially adapted for the SWORKz S35 vehicles from our partner Fast Race. The set includes 4 membranes of different hardness to adapt the damping to different routes. Yellow = soft, blue = medium, orange = hard

Pris 619,00 kr.
Tilbage til toppen