TILBEHØR

TILBEHØR

Der er 157 varer.

Viser 1-30 af 157 element(er)

Aktive filtre

REDS Racing Storage Bag

Reds Racing has just released a storage bag for engines, pipes, Esc, motors and spare parts. Padded internal section for protection of the powerplant and pipes with a front zip pocket for storage of small parts. Reds Racing storage bag measures 24x20x7 cm.

Pris 233,50 kr.

BLITZ 1/8 GT3 GBS Body with Wing (1,0mm)

The new BLITZ GT3-GBS 1/8 GT body shell was a newly modified version of previous GT3 body. The GT3-GBS modified the height of engine hood and the depth of A-pillar in order to meet the latest IFMAR GBS body rule. The body also modified the front bumper edge. The new bumper now is with more down force. It will result with more steering. The rear wheel arch surface was also extended. It not only increases the strength of the rear end, but also makes the body-shell able to move forward to increase steering. The standard version GT3-GBS body was built from 1.0mm high quality polycarbonate sheet, and the light version was with 0.8mm. Both versions include rear wing, wing screws, decal, and window mask for painting.

Pris 273,00 kr.

BLITZ 1/8 GT4 Body with Wing (1,0mm)

The new BLITZ 1/8th GT Body-shell GT4 is ready now, the new GT4 body is cooperate designed by JJ design with aerodynamic calculated and it is base on the real GT sport car, The body specification follows the IFMAR GT GBS rules and it also improves to have more steering and more overall stability, standard body build from 1.0mm high-quality clear polycarbonate sheet, rear wing set and window mask and decal all included.

Pris 273,00 kr.

REDS Bearing Tool Kit for 3,5CC Engines 14mm

The REDS Engine 14mm Engine Bearing Tool Kit for .21 size engines was developed for nitro racers that want to perform critical maintenance on their nitro engines. The kit includes a puller for 7mm and 14mm bearing removal and a presser for installation. The presser is made from high-quality Hard Coated Spring Steel. The bearing surfaces are ground for high precision bearing installation. The innovative rear bearing puller is made with Hard Coated Spring Steel and aluminum for unsurpassed lifespan and durability. All parts are CNC-machined for ultra-high precision. The lightweight design and compact size, make this tool easy and comfortable to use

Pris 569,00 kr.

FASTRAX 1800MAH GLOW STARTER AND CHARGER

This glow pack will get your engine up and running in no time, as the glow starter is supplied with a mains charger 240v charger, that plugs in the wall and goes. It's that simple.

Pris 119,00 kr.

MIP Hex Driver Wrench 1.5mm

Reach difficult angled screw heads
Designed to work up to 10 Degrees of angle
Speed Tip Version speeds up wrench time considerably
Super beefy ball end cut designed to increase overall tool head strength
Ball end dimensions optimized to increase tool head to screw head bite force.

Pris 125,00 kr.

MIP Speed Tip™ 1.5 mm Hex Driver Wrench Insert

Fits any 1/4" inch chuck handle or drill in order to speed up wrench time! Tool hex cut with diamond wheel for ultimate precision Tool shank CNC ground from US Grade tool steel drill blanks Tight tolerances held within 20 Microns which is .02 mm and moreover .0008 in. ! To put that into perspective that's like taking a human hair and dividing it by 4 ! Every tool assembled by hand Manufactured and packaged 100% in the USA

Pris 105,00 kr.

MIP Hex Driver Wrench 2.0mm

Reach difficult angled screw heads Designed to work up to 10 Degrees of angle Speed Tip Version speeds up wrench time considerably Super beefy ball end cut designed to increase overall tool head strength Ball end dimensions optimized to increase tool head to screw head bite force.

Pris 125,00 kr.

MIP Speed Tip™ 2.0 mm Hex Driver Wrench Insert

Fits any 1/4" inch chuck handle or drill in order to speed up wrench time! Tool hex cut with diamond wheel for ultimate precision Tool shank CNC ground from US Grade tool steel drill blanks Tight tolerances held within 20 Microns which is .02 mm and moreover .0008 in. ! To put that into perspective that's like taking a human hair and dividing it by 4 ! Every tool assembled by hand Manufactured and packaged 100% in the USA

Pris 105,00 kr.

MIP Hex Driver Wrench 2.5mm

Reach difficult angled screw heads Designed to work up to 10 Degrees of angle Speed Tip Version speeds up wrench time considerably Super beefy ball end cut designed to increase overall tool head strength Ball end dimensions optimized to increase tool head to screw head bite force.

Pris 125,00 kr.

MIP Speed Tip™ 2.5 mm Hex Driver Wrench Insert

Fits any 1/4" inch chuck handle or drill in order to speed up wrench time!
Tool hex cut with diamond wheel for ultimate precision
Tool shank CNC ground from US Grade tool steel drill blanks
Tight tolerances held within 20 Microns which is .02 mm and moreover .0008 in. ! To put that into perspective that's like taking a human hair and dividing it by 4 !
Every tool assembled by hand
Manufactured and packaged 100% in the USA

Pris 105,00 kr.

MIP Hex Driver Wrench 2.5mm Ball End

Reach difficult angled screw heads Designed to work up to 10 Degrees of angle Speed Tip Version speeds up wrench time considerably Super beefy ball end cut designed to increase overall tool head strength Ball end dimensions optimized to increase tool head to screw head bite force

Pris 125,00 kr.

MIP Hex Driver Wrench 3.0mm

Reach difficult angled screw heads Designed to work up to 10 Degrees of angle Speed Tip Version speeds up wrench time considerably Super beefy ball end cut designed to increase overall tool head strength Ball end dimensions optimized to increase tool head to screw head bite force

Pris 125,00 kr.

MIP Speed Tip™ 3.0 mm Hex Driver Wrench Insert

Fits any 1/4" inch chuck handle or drill in order to speed up wrench time! Tool hex cut with diamond wheel for ultimate precision Tool shank CNC ground from US Grade tool steel drill blanks Tight tolerances held within 20 Microns which is .02 mm and moreover .0008 in. ! To put that into perspective that's like taking a human hair and dividing it by 4 ! Every tool assembled by hand Manufactured and packaged 100% in the USA

Pris 105,00 kr.

MIP Hex Driver Wrench 2.0mm Ball End

Reach difficult angled screw heads
Designed to work up to 10 Degrees of angle
Speed Tip Version speeds up wrench time considerably
Super beefy ball end cut designed to increase overall tool head strength
Ball end dimensions optimized to increase tool head to screw head bite force.

Pris 125,00 kr.

MIP Nut Driver Wrench 5.5mm

Steel construction, optimized for durability and long wear characteristics
Nickel Plated for durability and protection against oxidation or corrosion
Heat Treated to Last a lifetime (70+ Rockwell Hardness)
Nice deep tool head in order to get to a nut that is located on a long screw
Thin wall tool head in order to fit into those tight areas.
Laser Engraved with MIP Logo and Size of Nut driver
Color Coded Band to quickly distinguish one size from another.
Short tool length, as the ergonomics of using the tool are improved in this configuration.
Super Comfy to the hand Polycarbonate Handles that are resilient to hot and cold weather, so wont harm your hands in poor weather conditions.
Every tool assembled by hand
Manufactured and packaged 100% in the USA

Pris 159,00 kr.

MIP Turnbuckle Wrench, 4.0mm

Angled tool head to be ergonomically more friendly when using the tool vs a straight cut.
Tolerances within +/- .001" (~ 0.03 mm)
Tiny MIP amber handle
Engraved sizing
Steel construction
Color coded size ring
Every tool assembled by hand
Manufactured and packaged 100% in the USA

Pris 119,00 kr.